Sensor Window Chemical Compatibility
For chemical cleaning or deicing agents, our general rules of thumb are located here: Sensor Cleaning
We always recommend checking online chem compatibility tables for our sensor materials when in doubt.
Enclosure: Aluminum 6061-T6 with clear anodize per MIL-A-8625 TYPE II
Window: Polycarbonate ( auto grade makrolon)
Connector: 316 SS
Misc HW: SSOur sensors have undergone chemical compatibility testing according to SAE J1455.
Below list of the 29 chemicals sensor is exposed to. Each unit was completely immersed in each chemical. Each unit was then allowed to remain covered in each chemical (after letting excess run off) for 24 hours before being cleaned and exposed to the next chemical.
